Author:

Parker 690 AC Drives

AC Drives, AC Variable Frequency Drives AC690+

The AC690+ Integrator Series is a single range of AC drives designed to meet the requirements of all variable speed applications from simple single motor speed control through to the most sophisticated integrated multi-drive systems. The heart of the AC690+ is a highly advanced 32-bit microprocessor based motor control model. This provides an exceptional dynamic performance platform to which can be added a host of communications and control options, enabling you to tailor the drives to meet your exact requirements. The AC690+ is available in 380V-500V 3-phase 0.75KW to 1000 KW and 220V-240V 0.75KW to 55KW.

 

Technical Specification

Power supply                                

380-460V (±10%) 3-phase 0.75KW to 1000kW ;
380-500V (±10%) 3-phase 2.2KW to 110kW;
220-240V (±10%) 1-phase 0.37KW to 2.2kW;
220-240V (±10%) 3-phase 0.37KW to 37 kW.

Output current value (A)                                 

2.5A – 1700A

Output power rating (KW)                            

0.75KW – 1000KW

COMMUNICATION INTERFACE                  

 RS232 / RS485 | Modbus |CANopen | ControlNet | Profibus |

 

OPERATING TEMPERATURE (C)                

 0-45C / 0-40C with IP40 cover / derate up to 50C max

OPERATING TEMPERATURE (F)                

 32-113F/ 32-104F with IP40 cover(derate up to 122F max)

OPERATING CONTROL MODES                   

V/Hz | Sensoriess Vector | Closed Loop Vector

690 AC Drives Applications:

• Water and wastewater
• Paper and pulp processing
• Steel
• Marine and offshore
• Outdoor cranes
• Wind & wave power generation
• Food processing.

Parker 690 AC Drives Frame:

parker-690-frame-b-frame-k

 

 

 

 

 

 

 

Parker 650 Series AC Drives

AC Drives, AC Variable Frequency Drives AC650 Series

The Parker AC650G is an entry level adjustable speed drive designed to provide cost-effective control of AC induction motors used in many everyday industrial applications. Its simplicity makes the AC650G ideally suited for use in standalone motor applications where previously a drive would have been considered too complex.

The AC650G is ideally suited to energy saving in pump and fan applications and delivers reliable, cost-effective voltage/frequency or sensorless vector speed control of your motor.

To prevent unauthorized changes to drive configuration after setup, the operator/programming keypad can be removed or password protected.

The AC650G is an easy to use, out of the box solution that will have your system up and running in record time. It provides reliable, robust motor control from 0.3 HP through 10 HP.

Electrical Characteristics

Power supply

230V AC Single phase | 230V AC Three phase | Three phase 380V…460V

Input frequency                                45…65 Hz

Output frequency                             0…240 Hz

COMMUNICATION INTERFACE       RS232 / RS485…

CERTIFICATES                                   CE (EMC & LVD) | cUL Listed

Environmental Characteristics

Operating temperature                  0…40 degree

Storage Temperature                     -25…+55 degree

Operating Altitude                         Up to 1100m

 

 

 

Parker 890 Series AC Drives

AC Drives, AC Variable Frequency Drives (VFD Drives)

The AC890 is a compact, modular systems drive engineered to control speed and position of open-loop and closed-loop, single- or multi-motor AC or servo motor

Parker 890 Applications:

Features

The AC890 can be configured for 4 different modes of operation

Open-loop (volts / frequency) control

This mode is ideal for basic, single or multi-motor speed control.

Sensorless vector control

With its ultra high performance sensorless vector algorithm,the AC890 delivers a combination of both high torque and close speed regulation without the need for any speed measuring transducer.

Closed-loop vector control

Full closed-loop flux vector performance can be achieved with the AC890 by simply adding an encoder feedback‘technology box’. This provides 100% continuous full load standstill torque, plus a highly dynamic speed loop more than sufficient for the most demanding applications.

Demanding environments

For environments that have dusty, humid or corrosive atmospheres, the AC890 can optionally be supplied with conformally coated circuit boards that improve the drives

resistance to corrosion, thereby increasing reliability and service life.Industries that would typically benefit from conformal coating could include :

  • Water and wastewater
  • Paper and pulp processing
  • Steel
  • Marine and offshore
  • Outdoor cranes
  • Wind & wave power generation
  • Food processing.

Parker 890 Frame drawing:

parker-890-drives-frame

 

 

 

parker 590 power board

Parker DC Drives Spare Parts & Accessories

AC Drives, Parker DC Drives Spare Parts & Accessories

Parker Drives Power Board and Control Board

 

Parker Drives 590+ Spares List (Frames 1-5 & H)

 

Frame 1

Product                         Power Board           Terminal Board
591P/0015/220/         AH470280U101         AH466407U001
590P/0015/220/        AH470280U102        AH466407U001
591P/0035/220/        AH470280U103        AH466407U001
590P/0035/220/       AH470280U104        AH466407U001
591P/0015/500/         AH470280U001        AH466407U001
590P/0015/500/        AH470280U002       AH466407U001
591P/0035/500/        AH470280U003       AH466407U001
590P/0035/500/       AH470280U004       AH466407U001

Frame 2

Product                            Power Board            Armature Thyristor
591P/0040/220/          AH470330U101*          CF385522U016
590P/0040/220/         AH470330U102*        CF385522U016
591P/0070/220/          AH470330U101*          CF385524U016
590P/0070/220/         AH470330U102*         CF385524U016
591P/0110/220/            AH470330U101*          CF385525U016
590P/0110/220/          AH470330U102*          CF385525U016
591P/0165/220/           AH470330U101*           CF470523U095
590P/0165/220/          AH470330U102*          CF470523U095
591P/0040/500/          AH470330U001*         CF385522U016
590P/0040/500/        AH470330U002*         CF385522U016
591P/0070/500/         AH470330U001*          CF385524U016
590P/0070/500/        AH470330U002*         CF385524U016
591P/0110/500/           AH470330U001*          CF385525U016
590P/0110/500/         AH470330U002*          CF385525U016
591P/0165/500/          AH470330U001*           CF470523U095
590P/0165/500/         AH470330U002*         CF470523U095

Frame 3 Fitted with the 590PXD Door Assembly LA466454U001 containing the Control Board and Adaptor Board AH466405U001

Product                           Power Board          Armature Thyristor
591P/0180/220/          AH385851U004      CF385525U016
590P/0180/220/         AH385851U005      CF385525U016
591P/0270/220/         AH385851U004       CF057366U014
590P/0270/220/        AH385851U005      CF057366U014
591P/0180/500/          AH385851U003      CF385525U016
590P/0180/500/        AH385851U002       CF385525U016
591P/0270/500/         AH385851U003      CF057366U014
590P/0270/500/        AH385851U002      CF057366U014

Frame 4 Fitted with the 590PD Door Assembly LA466454U002 containing the Control Board

Product                          Power Board            Suppression Board        Trigger Board          Thyristor
591P/0380/220/       AH466701U001       AH466704U001              AH466703U002       CF466796U016
590P/0380/220/      AH466701U001       AH466704U001              AH466703U002       CF466796U016
591P/0500/220/       AH466701U001       AH466704U001              AH466703U002       CF466768U016
590P/0500/220/      AH466701U001       AH466704U001              AH466703U002       CF466768U016
591P/0725/220/        AH466701U001       AH466704U001             AH466703U002       CF466697U016
590P/0725/220/       AH466701U001       AH466704U001             AH466703U002       CF466697U016
591P/0830/220/        AH466701U001       AH466704U001             AH466703U002       CF466767U016
590P/0830/220/       AH466701U001       AH466704U001             AH466703U002       CF466767U016
591P/0380/500/        AH466701U002      AH466704U001             AH466703U002       CF466796U016
590P/0380/500/       AH466701U002      AH466704U001            AH466703U002        CF466796U016
591P/0500/500/        AH466701U002       AH466704U001           AH466703U002        CF466768U016
590P/0500/500/       AH466701U002       AH466704U001           AH466703U002       CF466768U016
591P/0725/500/         AH466701U002       AH466704U001            AH466703U002      CF466697U016
590P/0725/500/        AH466701U002       AH466704U001            AH466703U002      CF466697U016
591P/0830/500/         AH466701U002       AH466704U001            AH466703U002      CF466767U016
590P/0830/500/       AH466701U002        AH466704U001            AH466703U002     CF466767U016
591P/0380/600/         AH466701U003        AH466704U002          AH466703U002     CF466796U018
590P/0380/600/        AH466701U003        AH466704U002          AH466703U002     CF466796U018
591P/0500/600/         AH466701U003        AH466704U002          AH466703U002     CF466768U018
590P/0500/600/        AH466701U003        AH466704U002          AH466703U002     CF466768U018
591P/0725/600/          AH466701U003        AH466704U002          AH466703U002     CF466697U018
590P/0725/600/         AH466701U003        AH466704U002         AH466703U002      CF466697U018
591P/0830/600/         AH466701U003         AH466704U002         AH466703U002     CF466767U018
590P/0830/600/        AH466701U003         AH466704U002        AH466703U002      CF466767U018

Frame 5 Fitted with the 590PD Door Assembly LA466454U002 containing the Control Board

Product Power Board Suppression Board Trigger Board Slave Power
591P/1580/220/ AH466701U001 AH466704U001 AH466703U002 * AH466706U001
590P/1580/220/ AH466701U001 AH466704U001 AH466703U002 * AH466706U001
591P/1580/500/ AH466701U002 AH466704U001 AH466703U002 * AH466706U002
590P/1580/500/ AH466701U002 AH466704U001 AH466703U002 * AH466706U002
591P/1580/600/ AH466701U003 AH466704U002 AH466703U002 * AH466706U003
590P/1580/600/ AH466701U003 AH466704U002 AH466703U002 * AH466706U003

Frame H Fitted with the 590PXD Door Assembly LA466454U001 containing the Control Board and Adaptor Board AH466405U001

Product Power Board Trigger Board Suppression Board Snubber Board
591P/1200/500/ AH466001U101 AH466003U001 AH466003U003 AH466004U001
590P/1200/500/ AH466001U101 AH466003U001 AH466004U001
591P/1700/500/ AH466001U101 AH466003U001 AH466003U003 AH466004U001
590P/1700/500/ AH466001U101 AH466003U001 AH466004U001
591P/2200/500/ AH466001U101 AH466003U101 AH466003U103 AH466004U101
590P/2200/500/ AH466001U101 AH466003U101 AH466004U101
591P/2700/500/ AH466001U101 AH466003U101 AH466003U103 AH466004U101
590P/2700/500/ AH466001U101 AH466003U101 AH466004U101
591P/1200/690/ AH466001U001 AH466003U002 AH466003U004 AH466004U002
590P/1200/690/ AH466001U001 AH466003U002 AH466004U002
591P/1700/690/ AH466001U001 AH466003U002 AH466003U004 AH466004U002
590P/1700/690/ AH466001U001 AH466003U002 AH466004U002
591P/2200/690/ AH466001U001 AH466003U102 AH466003U104 AH466004U102
590P/2200/690/ AH466001U001 AH466003U102 AH466004U102
591P/2700/690/ AH466001U001 AH466003U102 AH466003U104 AH466004U102
590P/2700/690/ AH466001U001 AH466003U102 AH466004U102

 

parker 590 power board

Keypad 6901 and Keypad 6911

keypad 6901 and keypad 6911

 

 

 

 

 

 

 

 

Parker DC Drives 590P & 591P

DC Drives, Parker SSD DC Drives 590P & 591P

Based on 40 years application experence all over the world.Parker design dc drives to help its clients improve productivity and reduce energy consumption. Currently,Parker has designed DC590+ Integrator Series 2 Digital DC Drive.The DC590+ dc drives use an advanced control platform to supply very good flexibility and performance.

 

DC590+ Drives have 590P 4 quadrant regenerative drive and 591P 2 quadrant non-regenerative drive.These two types are all good performance.Their current range from 15A to 2700A.Voltage range from 220V-500V(±10%) 50/60Hz,and 400V-690V(±10%) 50/60Hz option.

 

ELECTRICAL PARAMETERS

Current  Rating:                   

Frame 1 : 15A , 35A
Frame 2 : 40A , 70A , 110A , 150A , 165A
Frame 3 : 180A , 270A
Frame 4 : 380A , 500A , 725A , 830A
Frame 6 : 1250A , 1600A , 1950A
Frame H : 1200A , 1700A , 2200A,2700A       

Input Voltage                           

Three phase AC 230V | Three phase AC 380-480V | Three phase AC 500-690V

Output Power (HP)                              

1 – 2000HP

Communication Interface                  

RS232 | RS485 | CANopen  | Modbus | Profibus | Ethernet TCP / IP

CERTIFICATES                                        

CE (EMC & LVD) | cUL Listed | UL Listed |

Feedback options                                

 Armature Voltage |  Encoder |Tachometer

Operating temperature                      

 Frame : 1-2 0-45C  | Frame 3-H : 0-40C

Overload value                                    

150 % for 30s | 200% for 10s | Higher ratings with reduced overload are available

Parker 590  DC Drives Part Numbers list:

Part No. Current Power Part No. Current Size(mm)
590P/15A 15A 7.5KW 591P/15A 15A 200*375*220
590P/35A 35A 15KW 591P/35A 35A 200*375*220
590P/40A 40A 18.5KW 591P/40A 40A 200*434*292
590P/70A 70A 30KW 591P/70A 70A 200*434*292
590P/110A 110A 45KW 591P/110A 110A 200*434*292
590P/165A 165A 60KW 591P/165A 165A 200*434*292
590P/180A 180A 75KW 591P/180A 180A 250*485*234
590P/270A 270A 110KW 591P/270A 270A 300*485*234
590P/380A 380A 160KW 591P/380A 380A 253*700*358
590P/500A 500A 200KW 591P/500A 500A 253*700*358
590P/725A 725A 300KW 591P/725A 725A 253*700*358
590P/830A 830A 315KW 591P/830A 830A 253*700*358
590P/1580A 1580A 600KW 591P/1580A 1580A 506*700*358
590P/2200A 2200A 830KW 591P/2200A 2200A 850*1406*417
590P/2700A 2700A 1000KW 591P/2700A 2700A 850*956*417

Parker 590 Power Bridge:
590P : 4 Quadrant Regenerative DC Drives : Dual Three Phase SCR bridges
591P : 2 Quadrant Non-Regenerative DC Drives: Single SCR bridge

Parker dc drives 590 15A-2700A Framework,Frame 1- Frame 6

590-series-dc-digital-drive-frame1-Frame6

 

 

 

ssd-drives-590c

Eurotherm Drives 590C & 591C

DC Drives, SSD DC Drives 590C & 591C

Eurotherm 590C & 591C are digital dc drives,designed for use in a suitable enclosure,with associated control equipment.590+ DC drives have two type models,590C DC Drives and 591C DC Drives,590C is 4Q reversible DC drive,and 591C is 2Q no-reversible DC drive.Their current range from 15A to 720A.Voltage range from 220V-500V(±10%) 50/60Hz.

Eurotherm 590 product range:

590C : Three phase 4 quadrant regenerative converter up to 720A
591C  : Three phase 2 quadrant non-regenerative converter up to 720A

Eurotherm 590 series part number table:

Part No. Current Power Part No. Current Size(mm)
590C/35A 35A 15KW 591C/35A 35A 250*415*180
590C/70A 70A 30KW 591C/70A 70A 250*415*180
590C/110A 110A 45KW 591C/110A 110A 250*445*180
590C/150A 150A 60KW 591C/150A 150A 250*445*180
590C/180A 180A 75KW 591C/180A 180A 250*555*180
590C/270A 270A 110KW 591C/270A 270A 300*500*210

ELECTRICAL PARAMETERS

Power supply                                                3 Phase*220-500VAC(±10%)

Output voltage value                                  35 – 720A

Power (KW)                                                    15– 250KW

Feedback options                                         Encoder | Armature Voltage | Tachometer

Communication                                             RS232 / RS485 |Profibus | Modbus

OPERATING CONTROL MODES                 Regenerative | Non-Regenerative | Stack Controller

OPERATING TEMPERATURE (C)                  0-45C (15-165A) / 0-35C (180-270A) / 0-40C (380-2700A) / derate up to 55C max

OPERATING TEMPERATURE (F)                  32-113F (15-165A) / 32-95F (180-270A) / 32-104F (380-2700A) / derate up to 131F max

Eurotherm 590 series outline drawing:

eurotherm 590c outline drawing

 

 

 

 

Parker SSD DC Drives 514C & 512C

DC Drives

The 514C controller is intended for use in an Industrial Environment, it should be mounted within an enclosure which provides protection to the controller and the user.

The controller should be permanently earthed at the terminals provided.

The 514C controller is designed to control the speed of a DC Shunt wound or permanent magnet motor. It will provide control of the motor speed in all 4 Quadrants of operation.

The controllers are designed to operate from a single phase AC mains supply in the range of 110 Vac to 415 Vac at 50 or 60 Hz. An auxiliary supply is required for internal power supply generation and main supply contactor sequencing. Coding is derived from the main power terminals and is functional over the whole input voltage range.The Speed of the DC Motor is controlled using a linear closed loop system with a feedback signal from either tachogenerator or armature voltage, the feedback source being switch selectable.A current loop within the speed loop always ensures that controlled levels of current are applied to the motor, actual levels being scaleable via programmable switches.Motor protection is provided by a Stall detection circuit which will remove current from the motor after approximately 60 seconds.Controller protection is provided by an Instantaneous Overcurrent trip circuit overriding control in the event of a Short Circuit.

 

Technical Specification

AC Supply Voltage                               Single Phase 110V-480V ；50-60Hz

Current Rating                                     4A / 8A / 16A / 32A

Overload                                               150% for 60 seconds

Voltage selection                                Jumper selection of supply voltage

Speed Control                                     20:1 (arm v f/b),100:1 (tach fb)

Digital Inputs                                      Run,Enable,Stall override

Digital Outputs                                   Drive health

OPERATING ALTITUDE                      Up to 1000m ASL

 

Parker 514C & 512C Part Number:

Part No. Current Part No. Current Part No. Current
506/3A 3A 512C/8A 8A 514C/8A 8A
507/6A 6A 512C/16A 16A 514C/16A 16A
508/12A 12A 512C/32A 32A 514C/32A 32A

Parker 514C 512C Power Bridge:
514C : 4 Quadrant Regenerative , Dual Three Phase SCR bridges
512C  : 2 Quadrant Non-Regenerative , Single SCR bridge
Variable Field Control with SCR’s

Output Current Values:
4A / 8A / 16A / 32A

Typical applications :

  • Machine tool spindles
  • Wire drawing machines
  • Winders/Reelers

Parker 514C 512C Installation Procedure

INSTALLATION PRECAUTIONS

Before connecting AC supplies to this equipment:

1) Ensure good airflow over the heatsink. Maintain clearance of 75mm above and below

controller. For safety maintain a clearance of 20mm at the sides of the controller.

2) Operating temperature range does not exceed 0 to +40.

3) Controller is used in a Pollution Degree 2 environment.

4) Avoid vibration.